Tungsten Carbide Steel Plate
(Total 19 Products)-
Unit Price:USD 1 - 9.9 / KilogramBrand:HP Plate, HP WeldingModel No:HP-750TTransportation:Ocean,Land,Air,Express,OthersPackaging:Steel frame & steel belt fastenedSupply Ability:50,000㎡ wear plate per yearPlace of Origin:ChinaProductivity:anual capacity 5000 tonsThe thickness of PTA W Alloy Steel Plate can be precisely controlled (1-5mm), the thickness is uniform, and the dilution rate is low (about 6%). Has high bond strength; With the lower heat input, the heat affected zone of the substrate is small. The...
-
Unit Price:USD 1 - 9.9 / KilogramBrand:HP Plate, HP WeldingModel No:HP750Transportation:Ocean,Land,Air,Express,OthersPackaging:Steel frame & steel belt fastenedSupply Ability:50,000㎡ wear plate per yearPlace of Origin:ChinaProductivity:anual capacity 5000 tonsAs one of the high end Wear Resistant Steel Plates, Tungsten Carbide Steel Plate is a true welding process with deposits forming a metallurgical bond with the base metal. 3on3 Clad Abrasion Steel Plate has the light weight for greater wear...
-
Unit Price:USD 1 - 9.9 / KilogramBrand:HP Plate, HP WeldingModel No:HP-700WCTransportation:Ocean,Land,Air,Express,OthersPackaging:Steel frame & steel belt fastenedSupply Ability:50,000㎡ wear plate per yearPlace of Origin:ChinaTungsten Carbide Steel Plate is a true welding process, with deposits forming a metallurgical bond with the base metal. As one of the high end Wear Resistant Steel Plates, the dilution level of PTA W Alloy Steel Plate by Plasma Transfer Welding is...
-
Unit Price:USD 1 - 9.9 / KilogramBrand:HP Plate, HP WeldingMin. Order:100 KilogramModel No:Wear Plate-HP700TTransportation:Ocean,Land,AirPackaging:Steel frame & steel belt fastenedSupply Ability:50,000㎡ wear plate per yearPlace of Origin:ChinaWe produce PTAW Tungsten Carbide Overlay Plates as the higher grade of Wear Resistant Steel Plates, see the share from below on product properties Overlay Details of PTA W Alloy Steel Plate 3.2 Base Steel Q235B: C≤0.20% Mn≤1.4% Si ≤0.35% S ≤0.045 P...
-
Brand:HP Plate, HP WeldingMin. Order:100 KilogramModel No:HP-750WTransportation:Ocean,Land,AirPackaging:Steel frame & steel belt fastenedSupply Ability:500 tons per yearPlace of Origin:ChinaHP Tungsten Carbide Steel Plate is made out of unique hard facing process combined with the specially formulated hard facing alloys produces the harder, tougher and much anti-abrasion than normal grade of Wear Resistant Steel Plates like Q&T...
-
Unit Price:USD 99 / KilogramBrand:HP Plate, HP WeldingMin. Order:100 KilogramModel No:HP-750WTransportation:Ocean,Land,AirPackaging:Steel frame & steel belt fastenedSupply Ability:500 tons per yearPlace of Origin:ChinaQuick View On Product 1. Product Name: PTA W Abrasion Resistant Products 2. Body Material: A36 Mild Steel + Tungsten Carbide Overlay (Hardfacing) 3. Grade: HP750W Tungsten Carbide Steel Plate is made using the PTA process which has the great...
-
Unit Price:USD 99 / KilogramBrand:HP Plate, HP WeldingMin. Order:100 KilogramModel No:HP-750WTransportation:Ocean,Land,AirPackaging:Steel frame & steel belt fastenedSupply Ability:500 tons per yearPlace of Origin:ChinaTungsten Carbide Steel Plate is made using the PTA process which has the great capability of producing well anti-abrasive surfaces. While the hard facing of PTA W Alloy Steel Plate provides the premier wear-resistant surface capable of working in...
-
Brand:HP Plate, HP WeldingMin. Order:100 KilogramModel No:HP-750WTransportation:Ocean,Land,AirPackaging:Steel frame & steel belt fastenedSupply Ability:500 tons per yearPlace of Origin:ChinaHow to solve wear problem? Here is the best Wear Solution. Tungsten Carbide Steel Plate is made using the PTA process which has the great capability of producing well anti-abrasive surfaces. While the hard facing of PTA W Alloy Steel Plate provides...
-
Brand:HP Plate, HP WeldingMin. Order:100 KilogramModel No:HP-750WTransportation:Ocean,Land,AirPackaging:Steel frame & steel belt fastenedSupply Ability:500 tons per yearPlace of Origin:ChinaWear Resistant Steel Plates and Clad Abrasion Steel Plate are well successfully applied to Mining, Cement and Brick industry as Dozer Moldboards. Shovel Liners. Chute Liners. Dragline Buckets. Classifier Screens. Mine and Quarry Skips. Pug Mill...
-
Brand:HP Plate, HP WeldingMin. Order:100 KilogramModel No:HP-750WTransportation:Ocean,Land,AirPackaging:Steel frame & steel belt fastenedSupply Ability:500 tons per yearPlace of Origin:ChinaTungsten Carbide Steel Plate is made using the PTA process which has the great capability of producing well anti-abrasive surfaces. While the hard facing of PTA W Alloy Steel Plate provides the premier wear-resistant surface capable of working in...
-
Brand:HP Plate, HP WeldingMin. Order:100 KilogramModel No:HP-750WTransportation:Ocean,Land,AirPackaging:Steel frame & steel belt fastenedSupply Ability:500 tons per yearPlace of Origin:ChinaTungsten Carbide Steel Plate is kind of Clad Abrasion Steel Plate , which is made by Plasma Transfer Welding process. PTA is a true welding process, with deposits forming a metallurgical bond with the base metal. The dilution level of wear plate by...
-
Brand:HP Plate, HP WeldingMin. Order:100 KilogramModel No:Wear Plate_HP750WTransportation:Ocean,Land,AirPackaging:Steel frame & steel belt fastenedSupply Ability:500 tons per yearPlace of Origin:ChinaTungsten Carbide Steel Plate is kind of Wear Resistant Steel Plates which is under the effect of high temperature plasma jet, the alloy powder and substrate surface are rapidly melted and diffused together. The new substrate is generated as...
-
Brand:HP Plate, HP WeldingMin. Order:100 KilogramModel No:HP-750WTransportation:Ocean,Land,AirPackaging:Steel frame & steel belt fastenedSupply Ability:500 tons per yearPlace of Origin:ChinaPTA is a true welding process, with deposits forming a metallurgical bond with the base metal. The dilution level of wear plate by Plasma Transfer Welding is very close to those obtained by using the oxy-acetylene process. A further advantage of...
-
Brand:HP Plate, HP WeldingMin. Order:100 KilogramModel No:HP-750WTransportation:Ocean,Land,AirPackaging:Steel frame & steel belt fastenedSupply Ability:500 tons per yearPlace of Origin:ChinaTungsten Carbide Steel Plate is made by Plasma Transfer Welding process. Through the dispersion strengthened cladding powders and special plasma cladding technology, Tungsten Carbide Steel Plate works well against the high impact & abrasion....
-
Brand:HP Plate, HP WeldingMin. Order:100 KilogramModel No:HP-750WTransportation:Ocean,Land,AirPackaging:Steel frame & steel belt fastenedSupply Ability:500 tons per yearPlace of Origin:ChinaQuick View On Product 1. Product Name: Tungsten Carbide Steel Plate 2. Body Material: A36 Mild Steel + Tungsten Carbide Overlay (Hardfacing) 3. Grade: HP750W 4. Standard Size: 1000*2000mm; 1000*3000mm or Customised 5. Quality Standard: ASTM G65,...
-
Brand:HP Plate, HP WeldingMin. Order:100 KilogramModel No:HP-750WTransportation:Ocean,Land,AirPackaging:Steel frame & steel belt fastenedSupply Ability:500 tons per yearPlace of Origin:ChinaPlasma Transfer Arc Welding Products Under the effect of high temperature plasma jet, the alloy powder and substrate surface are rapidly melted, and diffused together. The new substrate is generated as metallurgical combination of high hardness...
-
Brand:HP Plate, HP WeldingMin. Order:100 KilogramModel No:HP-750WTransportation:Ocean,Land,AirPackaging:Steel frame & steel belt fastenedSupply Ability:500 tons per yearPlace of Origin:ChinaPlasma Transfer Arc Welding Products Under the effect of high temperature plasma jet, the alloy powder and substrate surface are rapidly melted, and diffused together. The new substrate is generated as metallurgical combination of high hardness...
-
Brand:HP Plate, HP WeldingMin. Order:100 KilogramModel No:HP-750WTransportation:Ocean,Land,AirPackaging:Steel frame & steel belt fastenedSupply Ability:500 tons per yearPlace of Origin:ChinaPlasma Transfer Arc Welding Products Under the effect of high temperature plasma jet, the alloy powder and substrate surface are rapidly melted, and diffused together. The new substrate is generated as metallurgical combination of high hardness...
-
Brand:HP Plate, HP WeldingMin. Order:100 KilogramModel No:HP-750WTransportation:Ocean,Land,AirPackaging:Steel frame & steel belt fastenedSupply Ability:500 tons per yearPlace of Origin:ChinaPlasma Transfer Arc Welding Products Under the effect of high temperature plasma jet, the alloy powder and substrate surface are rapidly melted, and diffused together. The new substrate is generated as metallurgical combination of high hardness...
PTA is a true welding process, with deposits forming a metallurgical bond with the base metal. The dilution level of Wear Plate by Plasma Transfer Welding is very close to those obtained by using the oxy-acetylene process.
The great advantage of using the PTA process is the capability of producing thin edge surfaces. While the hard facing provides the premier wear-resistant surface capable of working in all applicable service conditions at either ambient or elevated temperatures.
Together with the very low dilution (approx. 5 %) and the minimal distortion risk, the process is ideal for applications on wear-plates (wear-resistant composite sheets) or parts such as Fan Blades.
Besides Tungsten Carbide Coated Plates, HP Wear Resistant Group offers various products of wear plates namely Cr-Carbide Weld Clad Plates, Smooth Surface CCO plate, Heat Treated Wear Plates (AR Plate or Q&T Steel), Casting Plates in various grade and multiple size options.
HP Tungsten Carbide Coated Plates are made out of unique hard facing process combined with the specially formulated hard facing alloys produces the harder, tougher and better wear resistant plates.
PTAW Tungsten Carbide Overlay Plates
3.1 Overlay Details
Item | Casted Angular WC (HV Hardness) | Ni Cr B Si Matrix (HRC Hardness) |
Mass Percentage | 60% | 40% |
Elements | W 96%-95.7%, C 3.9-4.2% | Ni, Cr, B, Si, C, Mn, Fe |
Hardness | 2100-2500 HV | 46-50HRC |
Mesh | 80-270/60-325 | 80-270/60-325 |
Thickness | 3-25mm depend on overlay dimension and shape | |
Dimension | According to drawings from customers request | |
Technology | PTAW with CNC operation program system | |
Application | Tooth/Adaptor/Shrouds/Liner/Chute (Middle impact force) Iron Mine/Copper Mine/Coal Mine |